Care & Cleaning

For best results, keep the following in mind when caring for your KOHLER^® product:

Always test your cleaning solution on an inconspicuous area before applying to the entire surface.
Wipe surfaces clean and rinse completely with water immediately after applying cleaner. Rinse and dry any overspray that lands on nearby surfaces.
Do not allow cleaner to soak.
Use a soft, dampened sponge or cloth. Never use an abrasive material such as a brush or scouring pad to clean surfaces.
Click here for warranty information.

* Success with cleaners and procedures is dependent upon such factors as the hardness and temperature of the water, using exact measurements of ingredients, changes in cleaning formulas and the condition of the product being cleaned. Since there are variations within these factors, Kohler cannot guarantee the effectiveness of the formulas.

Toilet Seats

Avoid using aerosol products.
Do not allow abrasive chemicals and cosmetics (such as fingernail polish and aftershave) to come in contact with the toilet seat, as they can damage the finish.
Painted wood seats require special care and cleaning. Use only mild detergent (such as dish washing soap).

Success with cleaners and procedures is dependent upon such factors as the hardness and temperature of the water, using exact measurements of ingredients, changes in cleaning formulas and the condition of the product being cleaned. Since there are variations within these factors, Kohler cannot guarantee the effectiveness of the formulas mentioned.

Care Tip

Clean seat with a mixture of dishwashing liquid and water, or any of the products listed for toilet seats, using a soft sponge or cloth. Rinse clean, dry with a soft towel, and let the seat air-dry to ensure the hinge area dries completely. If you remove the toilet seat, consider the use of a large utility sink to assist in cleaning.

Bidet Seats

Care Tips for Bidet Seats

Avoid using aerosol products.
Do not allow abrasive chemicals and cosmetics (such as fingernail polish and aftershave) to come in contact with the toilet seat, as they can damage the finish.

Cleaning the Wand
NOTE: The spray wands can only be extended for cleaning when the seat is not activated or occupied.

Raise the cover and seat.
Press the “wand” icon on the panel to extend the spray wand forward for cleaning.
Clean the spray wand with a soft-bristled brush and hot water.
Press the “wand” icon on the panel again to retract the spray wand.

Clean the Filter Screen
NOTE: The filter screen should be cleaned once every six months or any time there is a drop in water pressure to the bidet wand.

Remove the seat.
Turn off the water supply at the supply stop.
Disconnect the water supply hose from the seat.
Using a long-nosed pliers, carefully remove the filter screen from the seat inlet.
Clean the filter screen with a soft-bristled brush.
Reinstall the filter screen.
Reinstall the seat.

IMPORTANT! Risk of product damage. Do not cross-thread the connection.

Reconnect the water supply hose to the seat.
Turn on the water supply.
Check all connections for leaks and make any adjustments as needed.

Success with cleaners and procedures is dependent upon such factors as the hardness and temperature of the water, using exact measurements of ingredients, changes in cleaning formulas and the condition of the product being cleaned. Since there are variations within these factors, Kohler cannot guarantee the effectiveness of the formulas mentioned.

Click here for warranty information or call Toll Free no. 1 800 103 224.

_{* Success with cleaners and procedures is dependent upon such factors as the hardness and temperature of the water, using exact measurements of ingredients, changes in cleaning formulas and the condition of the product being cleaned. Since there are variations within these factors, Kohler cannot guarantee the effectiveness of the formulas.}